Dquad Obsession V2 5" 210
- Tip of the arms are now less "pointy" and we removed the cutout to avoid fast wearing of these tips.
- The arms are now 2mm wider (15mm instead of 13mm) and we also removed the small curve near the aluminum bracket. This makes the width of the arms significantly wider at this critical spot.
- We removed the holes from the top and bottom plates. And also made these 2mm thick instead of 1.5mm.
- The XT-60 bracket is now made out of PET-G. A material that is significantly stronger than PLA. Also the design has changed a bit to strengthen the critical areas.
- Every change is compatible with the previous version and all parts are interchangeable.