This board is designed to work with current BeeDuctrix / Tiny Whoop / Inductrix setups/Eachine E010, just replace the current board with our new BeeCore mainboard and experience the next level of flight control.
STM32 F303 processor
Size: 2mm x 26mm
Weight: 3 grams
Work voltage: 3.7v-5v / 1S Lipo battery input
Firmware Version: Cleanflight 1.13.0
Receiver option: 8CH Frsky protocol SBUS output D8 Mode
6CH Flysky protocol PPM output
6CH DSM2 protocol PPM output
1.The world's first F3_EVO controller compatible for Frsky/Flysky/DSM2 (Optional).
2.Cleanflight ready, born for acro flight controller for the BeeDuctrix / Tiny Whoop / Inductrix quad!
3.Full Cleanflight/Betaflight compatibility on a STM32 F303 F3_EVO 3x1 style processor.
4.Fully programmable through Cleanflight / Betalfight using the onboard USB port! Tune all the parameters, PID's, and rates to your perfect settings!
5.High discharge battery connector wire for more power and performance.
6.Can fly your Inductrix style quad in full rate mode (or even air mode!), fully execute flips/ rolls, and shoot the smallest of gaps with precision! Tuned to give you that locked in feeling you get with standard race quads.
1.Frsky Receiver Support FRSKY X9D/X9D PLUS(D8 mode),and XJT (D8 Mode),DJT DFT DHT Transmitter.
2.Flysky Receiver Support FS-I6, Echine I6, TH9X, DEVO 7E with A7105 Module series Transmitter.
3.DSM2 Receiver Support Spectrum/JR(DSM2 protocol) DEVO10/DEVO 7E(with deviation firmware).