(1 review) Write a Review
SkyRC B6AC V2 main image

SKYRC B6AC V2 is a high-performance, micro processor control charge/discharge station with battery management suitable for use with all current battery types, with integral equalizer for six-cell Lithium- Polymer (LiPo), Lithium iron phosphate(LiFe) and Lithium-Ion (LiIon) batteries; maximum 6A charge current and maximum 50W charge power.

SKYRC B6AC V2 is the upgraded version for well-known IMAX B6AC. It is more accurate, stable and also has some new features and functions.

Users can set the terminal voltage by themselves and connect it to PC for PC control and firmware upgrade. You can also use it as Lithium Battery Meter and Battery Internal Resistance Meter. There are Automatic Charging Current Limit, Capacity Limit, Temperature Threshold and Processing Time Limit which makes the charger safe.

  • 135mm x 144mm x 36mm
  • Dual AC/DC Input. AC: 100-240V, DC: 11-18V
  • 2-6S XH Pluvg-in balance sockets


Different Charging Modes

  • LiPo, LiFe, LiIon Batteries - Normal, Balance, Fast. Discharge, Storage
  • NiCd/NiMH Batteries - Normal, Auto, Discharge, Cycle, Re-Peak
  • PB Battery - Normal, Discharge


Lithium Battery Balancer: SKYRC B6 AC V2 employs an individual-cell-voltage balancer. It isn't necessary to connect an external balancer for balance charging.

Program Data Store/Load: The charger can store up to 10 different charge/discharge profiles for your convenience. Users can call out these data at any time without any special program setting.

Battery Meter: The user can check battery's total voltage, the highest voltage, the lowest voltage and each cell's voltage by this charger.

Battery Resistance Meter: The user can check battery's total resistance, the highest resistance, the lowest resistance and each cell's resistance.

Maximum Safety: Automatic Charging Current Limit
                          Capacity Limit
                          Temperature Threshold
                          Processing Time Limit
                          * The Maximum Safety makes the charger safer than B6 AC+ V1

Terminal Voltage Control: The charger allows user to set the charge/ discharge end voltage.


PC Control

The user can monitor pack voltage, cell voltage and other data during the charging, view charge date in realtime graphs, and can also control charging and update firmware from "Charge Master".

1 Review Hide Reviews Show Reviews

  • 5
    1st class product

    Posted by Blueskies on 24th May 2017

    After watching video of the cheaper copies didn’t want to burn the house down for a couple of dollars. Product arrived fast, not 7 – 40 days, well packaged, a lifetimes charging investment. Used with parallel board and new batteries the sky’s the limit…..