TBS MR Steele 2306 2345KV Silk Motors

(1 review) Write a Review
TBS MR Steele 2345KV Silk Motors main image

The conventional mould of motor design has been shattered. Motors are now chewing through batteries more than ever and Mr Steele, with the help of TBS have shifted motor design to smoothness, durability and quality. All while maintaining an acceptable level of power without the puff inducing issues of most popular motors. Top of the line magnets and weight requirements have been scrapped to ensure motor durability and reliability remain consistent.

Mr Steele has had a hand in the development of the TBS MR Steele 2345KV Silk Motors. Months in the making, the Mr Steele motors provide silky smoothness, reliability & durability without sacrificing expensive lipos.


We started out with a couple of corner-stones in motor properties. High kV, low kV. Big stator, small stator. Varying stator laminations, winding techniques and copper diameters. We analyzed the results on a thrust test stand next to all reputable motors, and matched them to the requirements of Mr.Steele's reference motors. We found the closest match to his requirements, and produced 2 different styles to send for Mr.Steele for testing. After running each of them for a few days, we received feedback, made corrections on the motor, and re-made samples. After a total of 5 iterations and over 100 motors sent, we finally managed to isolate the perfect candidate. But the quest was not done! Next we worked on the finish. To produce a white motor, all tolerances were re-calculated. Each and every detail of the motor, down to the C-clip, was investigated, refined and tested. After almost 4 months of ups and downs, today we are able to release and stand behind what we believe is a motor that will cause a paradigm shift for this industry.


  • Stator size: 2306
  • kV rating: 2345kV
  • Weight: 28.5g
  • Color: white
  • Windings: by hand
  • Awesomness factor: over 9000
  • Stator lamination: None of your business


  • 1x TBS Mr Steele 2345kv motor
  • 4x Mounting screws M3x6.5
  • 1x Aluminum Low-Profile Prop nut

1 Review Hide Reviews Show Reviews

  • 5
    Dat Punch

    Posted by kuatoFPV on 16th Sep 2017

    So if don't fly these, you should. That is all.